Article
Thai Baby Product Rules: TIS 685 & FDA Food Contact
17 Nov 2026

In Thailand, the rules that apply to a baby product depend on the product category: toys must meet TISI's mandatory toy safety standard TIS 685-1:2562; items that touch food — bottles, bowls, spoons, silicone feeding pads — must comply with Thai FDA food-container notifications; and every label must carry Thai-language information.
This article breaks down what each standard covers, what is tested, and where the official documents live, so a brand can verify the requirements for its own SKUs before importing.
Which product falls under which rule
- Toys for children under 14 → TISI, mandatory standard TIS 685-1:2562
- Bottles, milk containers, bowls, spoons and other food-contact items → Thai FDA: Notification No. 369/2558 (feeding bottles and milk containers for infants and young children) and No. 435/2565 (plastic food containers)
- Infant food, follow-on formula and weaning food → Thai FDA: classified as "specifically controlled food" (Category 1), which requires an application and a food serial number
- Baby cosmetics such as lotion and sunscreen → Thai FDA: must be registered (notified) before sale, with a Thai-language label
- Electrical baby products such as bottle warmers → check the TISI database of products that must meet a standard — electrical safety standards may also apply
- General labelling rules for controlled products (Consumer Protection Act, Section 30) — see Bringing a Baby Brand to Thailand: Standards & Channels
The two bodies come from different ministries. TISI (the Office of Industrial Standards under the Ministry of Industry) sets Industrial Product Standards (TIS/มอก.) for industrial products, with toys as the main mandatory category covering children's products. The Thai FDA (under the Ministry of Public Health) governs food safety, food-contact materials and cosmetics. A single baby product can therefore fall under both: for example, a bottle with a training grip must meet the FDA's food-contact criteria for the material, and if the grip counts as a toy, the toy rules apply as well. Classifying every SKU is the most important first step.
Toys: TIS 685-1:2562 (mandatory)
The Industrial Product Standard (TIS) 685 Part 1:2562 — Toys: Safety requirements, Part 1: Requirements — is prepared from ISO 8124-1, -2, -3 and -6 together with EN 71-1, and is a mandatory standard in force since 22 September 2022 under the related ministerial regulation.
The scope covers toys used by children under 14, including the parts and accessories of toys. It sets requirements in three main test areas:
- Mechanical and physical properties, such as small parts that pose a choking or inhalation risk
- Flammability of the materials
- Chemicals, such as the migration of certain elements from the material and the level of phthalates in plastic, rubber and surface coatings — with tighter limits for toys for children under 3 that have mouth-contact parts
Test methods are set out in TIS 685 Part 2.
The standard is mandatory because toys are products children use closely and often unsupervised, so the manufacturer is accountable for both physical and chemical safety. Making it a mandatory standard also lets consumers verify that a product has been assessed against Thai criteria, via the TIS mark and licence QR code on the label.
One important detail: some items are not classified as toys, such as slings, darts, kites, pointed darts, model cars, science experiment sets, or children's fashion jewellery. A brand should check SKU by SKU whether an item falls under this standard, because the testing steps and labelling requirements differ.
For items within the scope, manufacturers and importers must register the standard (TIS licence): the product carries the TIS mark with the licence QR code and must have passed the standard's requirements before it is sold in Thailand.
Toy labelling requirements (per TISI's controlled-products database) state that the label must
- be in Thai
- show the importer's name or logo and place of business
- show the manufacturer's name and country of origin
- state the age range of use
- carry any warnings
- state the month and year of manufacture or import
- print the word "Warning" in bold at least 4 mm high, with warning details at least 3 mm high
Official documents: full text of TIS 685-1:2562 (PDF) and the TISI database of mandatory-standard products — toys.
Food-contact items: Thai FDA notifications
Items that touch food directly — baby bottles, milk containers, bowls, spoons, silicone pads or kids' cups — fall under the Food Act B.E. 2522 and the related Ministry of Public Health notifications.
"Migration", the term used throughout these notifications, means the amount of chemicals from the container material that can transfer into the food or drink. The FDA therefore sets maximum limits for migrating substances, defined per material type, so that the substances from a container in contact with an infant's or child's food stay at safe levels.
- Notification No. 435 B.E. 2565 on the quality/standards of plastic food containers, issued in June 2022 with all plastic food containers required to comply from 18 June 2024, sets the 12 permitted polymers (plastics), alone or in mixtures, migration limits for substances, and the rules for food-grade recycled plastic.
- Notification No. 369 B.E. 2558 on feeding bottles and milk containers for infants and young children sets quality requirements and material-specific migration levels dedicated to infant feeding equipment.
Silicone baby products such as bowls, spoons or feeding pads are food-contact items; the brand should confirm with the FDA which notification applies to the material.
The FDA is also currently consulting on amendments to Notification 435 (comment period closes 31 December 2026), so brands should check the latest status before launch — see the FDA announcement.
Official documents: Notification 435/2565 in English (PDF), Notification 369/2558 analysis-methods annex (PDF).pdf) and the FDA laws and regulations page for food and food-contact.
Other related categories
- Infant food, follow-on formula and weaning food are "specifically controlled food" (Category 1) under the Thai FDA — the strictest category, requiring an application to the FDA before production or import. Details on the FDA food-categorisation page.
- Baby cosmetics such as lotion, sunscreen or balm must be registered (notified) in Thailand before sale, and the label must be in Thai and clearly legible. Details on the FDA cosmetics page.
Pre-launch checklist
- Classify the products — SKU by SKU: toy, food contact, food, cosmetic or electrical.
- Identify the exact standard or notification — the specific document and the related test methods.
- Design the Thai-language label — complete for each category's rules, including character sizes and mandatory data.
- Appoint a Thai importer — a registered Thai legal entity responsible for the product, documentation and regulator contact.
- Re-check the latest status before launch — rules and notifications are revised periodically, so confirm with the FDA / TISI or your Thai partner.
Ask–Answer
Does every baby product need a TISI certificate? No — mandatory standards cover only the products TISI lists, and toys are the main baby category. Food-contact items and cosmetics sit under the FDA with separate procedures; check SKU by SKU.
My toys already have CE or EN 71. Do I still test in Thailand? Yes. TIS 685-1:2562 is prepared from ISO 8124 and EN 71, but products sold in Thailand must be registered under TISI. European test results support the application; they do not replace TISI's process.
Which rules cover silicone baby feeding products (bottles, bowls, spoons)? Food-contact rules. Notification 369/2558 sets material-specific migration levels for feeding bottles and milk containers for infants and young children; plastic containers follow Notification 435/2565. Confirm with the FDA which notification applies to your material.
What must infant formula go through before sale? Infant food, follow-on formula and weaning food are Category 1 "specifically controlled food": an application to the Thai FDA and a food serial number are required before production or import — not a simple notification.
Who can run the standards process for us? Your Thai importer or partner owns the paperwork, test coordination and labelling — see Bringing a Baby Brand to Thailand: Standards & Channels.
Talk to BC Link
If your brand is preparing to enter Thailand — mapping the standards, testing, Thai labelling and retail channels — the BC Link team can walk you through every step. Learn more at About BC Link or Contact us.
References
- TIS 685-1:2562 (2019) Toys: Safety requirements, Part 1 – Requirements (full standard text), Thai Industrial Standards Institute
- TISI database of mandatory-standard products — toys (labelling requirements and effective date), Thai Industrial Standards Institute
- Notification of the Ministry of Public Health No. 435 B.E. 2565: Quality/standards of plastic food containers (English), Thai FDA
- Notification of the Ministry of Public Health No. 369 B.E. 2558: Feeding bottles and milk containers for infants and young children (analysis-methods annex), Thai FDA.pdf)
- Laws and Regulations — food and food-contact category, Thai FDA
